Resin Anchor Paste

Be the first to review this product

Availability: In stock

Pack size: 150ml

Quick Overview

A Self mixing 2 component adhesive resin paste for anchoring bolts and can be used to adhere a wide range of materials. 150ml.

Resin Anchor Paste

Double click on above image to view full picture

Zoom Out
Zoom In

More Views


Resin Fixing paste is a high performance, suitable for use in concrete, brickwork and stone fast curing two-part chemical anchoring Suitable for fixing wall ties, starter bars, studs & bolts System based on unsaturated Polyester Suitable for close edge fixings. Pre-packed 10:1 ratio.  Chemically resistant, Waterproof & vibration proof.

How to use.

Unscrew the cap and cut the metal clip off before screwing the mixer nozzle on. Fit the cartridge into the applicator gun and gradually apply pressure to the trigger until the material exudes from the end of the nozzle. You should always waste the first 10ml or so of resin until you get an even colour. Insert the nozzle into the hole & gun the material out, removing the nozzle slowly as the hole fills up. Once sufficient resin is in the hole, release the pressure from the gun and place the stud to be fixed into the hole with a twisting action to ensure full contact between hole, resin & stud. Allow resin to cure fully before loading. Please see label on cartridge for full installation instructions.

When using as an adhesive, gun the material out onto one surface and press into place with a twisting action.

Additional Information

Pack size 150ml
Coverage No

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.